Casio Radio Controlled WVA-470DE-1AVEF инструкция

Casio Radio Controlled WVA-470DE-1AVEF
7.7 · 5
PDF инструкция
 · 6 страниц(ы)
английский
инструкцияCasio Radio Controlled WVA-470DE-1AVEF

Operation Guide 3353 3354 5053

5
Analog Timekeeping
The analog time of this watch is synchronized with the digital time. The analog time
setting is adjusted automatically whenever you change the digital time.
Note
The hands for the analog timepiece move to adjust to a new setting whenever any
of the following occurs.
When you change the digital time setting manuallyWhen the digital time setting is changed by time calibration signal receptionWhen you change the Home City code and/or DST setting
If the analog time does not match the digital time for any reason, use the procedure
described under To adjust the analog time to match the analog setting to the
digital setting.
Whenever you need to adjust both the digital and the analog time settings
manually, make sure you adjust the digital setting first.
Depending on how much the hands have to move in order to adjust to the digital
time, it may take some time before they stop moving.
To adjust the analog time
1. In the Timekeeping Mode, press C five times to enter
the Hand Setting Mode.
2. Hold down A until
starts to flash, which
indicates the setting screen.
The second hand will move at high speed to the 12
oclock position, where it will stop.
3. If the second hand is not pointing precisely at 12
oclock at this time, use D to adjust its position.
Each press of D causes the second hand to
advance by one second.
4. Press C. This will cause the time on the digital display to flash, which indicates
that adjustment of hour and minute hands is selected.
5. Use D and B to adjust the analog setting as described below.
When you want to do this:
Move the hand setting
forward 20 seconds
Perform this button operation:
Press D.
Move the hand setting back
20 seconds
Move the hand setting a short
way forward at high speed
Move the hand setting a short
way back at high speed
Move the hand setting a
long way forward at high
speed
Press B.
Hold down D.
Release D when the hands reach the setting
you want.
Hold down B.
Release B when the hands reach the setting
you want.
While holding down D to move the hands at
high-speed, press B to lock the high-speed
hand movement.
To stop the hand movement, press any
button.
Hand movement stops automatically if the
hour hand makes one full (12-hour)
revolution.
Move the hand setting a long
way back at high speed
While holding down B to move the hands at
high-speed, press D to lock the high-speed
hand movement.
To stop the hand movement, press any
button.
Hand movement stops automatically if the
hour hand makes one full (12-hour)
revolution.
6. Press A to exit the setting screen.
The minute hand will be adjusted slightly to match the seconds when you exit the
setting screen.
To return to the Timekeeping Mode, press C.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|

Reference

This section contains more detailed and technical information about watch operation.
It also contains important precautions and notes about the various features and
functions of this watch.
Power Saving Function
When turned on, the Power Saving function automatically
enters a sleep state whenever the watch is left in an area
where lighting is dim (less than about 30 lux).
The following shows how watch functions are affected
when left in a dark place while in the sleep state.

Power Saving

indicator

The sleep state is indicated by a blank screen with the Power Saving indicator (
PS
)
flashing on it.
Wearing the watch inside the sleeve of clothing can cause it to enter the sleep state.
Approximate Period
in sleep state
3 to 4 days
8 days or more
Functions
LCD off
Alarm, hourly time signal, analog timekeeping and auto
receive enabled
LCD off, alarm and hourly time signal disabled
Analog timekeeping stopped at 12 oclock
Auto receive disabled
To turn Power Saving on and off
1. In the Timekeeping Mode, hold down A until the
transmitter indicator starts to flash, which indicates the
setting screen.
The second hand will move at high speed to the 12
oclock position, where it will stop.
2. Press A again.
3. Press C seven times until the Power Saving on/off
screen appears.
4. Press D to toggle Power Saving on (
ON
) and off (
OF
).
5. Press A to exit the setting screen.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|

On/Off status

The second hand will advance at high speed to the correct position in accordance
with the digital time seconds count, and resume normal movement from there.
The Power Saving indicator (
PS
) is on the display in all modes while the Power
Saving is turned on.
Auto Return Features
If you leave the watch in the Alarm or Hand Setting Mode, or with the Battery Level
Indicator (HI or MID) displayed for two or three minutes without performing any
operation, it automatically returns to the Timekeeping Mode.
If you leave the watch with a flashing setting on the display for two or three minutes
without performing any operation, the watch automatically exits the setting screen.
Scrolling
The B and D buttons are used in various modes and setting screens to scroll
through data on the display. In most cases, holding down these buttons during a scroll
operation scrolls through the data at high speed.
Initial Screens
When you enter the World Time or Alarm Mode, the data you were viewing when you
last exited the mode appears first.
Radio-controlled Atomic Timekeeping Precautions
Strong electrostatic charge can result in the wrong time being set.
The time calibration signal bounces off the ionosphere. Because of this, such factors
as changes in the reflectivity of the ionosphere, as well as movement of the
ionosphere to higher altitudes due to seasonal atmospheric changes or the time of
day may change the reception range of the signal and make reception temporarily
impossible.
Even if the time calibration signal is received properly, certain conditions can cause
the time setting to be off by up to one second.
The current time setting in accordance with the time calibration signal takes priority
over any time settings you make manually.
The watch is designed to automatically update the date and day of the week for the
period January 1, 2000 to December 31, 2099. Setting of the date by the time
calibration signal cannot be performed starting from January 1, 2100.
This watch can receive signals that differentiate between leap years and non-leap
years.
Though this watch is designed to receive both time data (hour, minutes, seconds)
and date data (year, month, day), certain signal conditions can limit reception to time
data only.
Normally, the signal reception date shown by the last signal screen is the date data
included in the received time calibration signal. When only time data is received,
however, the last signal screen shows the date as kept in the Timekeeping Mode at
the time of signal reception.
If you are in an area where proper time calibration signal reception is impossible, the
watch keeps time within ±15 seconds a month at normal temperature.
If you have problems with proper time calibration signal reception or if the time
setting is wrong after signal reception, check your transmitter, current city code, DST
(summer time), and auto receive settings. The following are the initial factory defaults
for these settings.
Setting
Transmitter
City code
DST (summer time)
Auto receive
Initial Factory Default
AT
LON
(London) (Module 3353) BER (Berlin)
(Module 3354/5053)
(Auto switching)
(Auto receive)
In this case:
The first signal auto search operation
after factory default settings are in effect,
or after the city code has been changed
Any case other than the above.
The watch does this:
1. Checks the Anthorn signal first.
2. If the Anthorn signal cannot be received,
checks the Mainflingen signal.
1. Checks the last successfully received
signal first.
2. If the last successfully received signal
cannot be received, checks the other
signal.
Transmitters
This watch is designed to receive the time calibration signal transmitted from Anthorn,
England and the signal from Mainflingen, Germany. You can select either one of the
transmitters, or you can configure the watch to automatically select the transmitter that
has the strongest signal.
The following explains how the watch determines which transmitter it should check
first while the watch is configured for auto transmitter search (
AT).
Module 3353
In this case:
The first signal auto search operation
after factory default settings are in effect,
or after the city code has been changed
Any case other than the above.
The watch does this:
1. Checks the Mainflingen signal first.
2. If the Mainflingen signal cannot be
received, checks the Anthorn signal.
1. Checks the last successfully received
signal first.
2. If the last successfully received signal
cannot be received, checks the other
signal.
Module 3354/5053
Since the watch checks signals from both transmitters when AT is selected as the
transmitter setting, signal reception can take as long as 14 minutes.
To find out the module number of your watch, look at its
back cover. The Module number (3353, 3354, or 5053) is
engraved inside the box on the back cover.
3353
3354
5053
To recover from the sleep state
Perform any one of the following operations.
Move the watch to a well-lit area.
Press any button.

Инструкция

Посмотреть инструкция для Casio Radio Controlled WVA-470DE-1AVEF бесплатно. Руководство относится к категории Часы, 5 человек(а) дали ему среднюю оценку 7.7. Руководство доступно на следующих языках: английский. У вас есть вопрос о Casio Radio Controlled WVA-470DE-1AVEF или вам нужна помощь? Задайте свой вопрос здесь

Нужна помощь?

У вас есть вопрос о Casio Radio Controlled WVA-470DE-1AVEF а ответа нет в руководстве? Задайте свой вопрос здесь Дай исчерпывающее описание проблемы и четко задайте свой вопрос. Чем детальнее описание проблемы или вопроса, тем легче будет другим пользователям Casio Radio Controlled WVA-470DE-1AVEF предоставить вам исчерпывающий ответ.

Количество вопросов: 0

Технические характеристики Casio Radio Controlled WVA-470DE-1AVEF

Ниже вы найдете технические характеристики изделия и руководства по эксплуатации Casio Radio Controlled WVA-470DE-1AVEF.

Главная
Бренд Casio
Модель Radio Controlled WVA-470DE-1AVEF
Изделие Часы
Язык английский
Тип файла Руководство пользователя (PDF)

Часто задаваемые вопросы

Не можете найти ответ на свой вопрос в руководстве? Вы можете найти ответ на свой вопрос ниже, в разделе часто задаваемых вопросов о Casio Radio Controlled WVA-470DE-1AVEF.

Не нашли свой вопрос? Задайте свой вопрос здесь

Нет результатов