Plantronics Voyager Legend BT300

Plantronics Voyager Legend BT300 инструкция

(1)
  • Charge and Fit Headset
    Three ways to charge your headset
    Your new headset has enough power to pair and make a few calls before
    charging is needed, though you may charge at any time.
    1 Align snap-fit magnetic areas of headset and charging device.
    2 Attach charging device to USB wall charger or laptop for 90 minutes. LEDs
    turn off once fully charged.
    USB cable to PC or USB wall charger
    Charge case to PC or USB wall charger
    NOTE Your charge case has an internal battery and can fully recharge your headset
    twice while on the go before needing connection to a charge cable.
    Charge stand to PC or USB wall charger
    Fit your headset
    Replace the eartip for a better fit.
    1 Push in eartip and rotate to the left to unlock it.
    2 Align new eartip into slot.
    3 Push in eartip and rotate to the right to lock it into place.
    To wear the headset on your other ear, rotate the boom upwards then
    twist it around so eartip is on other side before lowering boom.
    2
    1
    3
    Connect PC and Call
    Connect
    1 Power headset on.
    2 Insert Bluetooth USB adapter directly into your PC USB port. The LED
    will flash and then turn solid blue to indicate the headset is connected
    to the USB adapter. You will also hear “PC connected”. The LED remains
    solid blue when not on an active call.
    NOTE Your Bluetooth USB adapter comes pre-paired to your headset.
    3 Load Plantronics Spokes software by visiting plantronics.com/software
    and click on the download button.
    NOTE Spokes software allows you to customize your headsets behavior
    through advanced settings and options.
    4 Check your audio settings
    Confirm the speaker and microphone settings for your PC softphone are
    set to Plantronics BT300.
    Windows 7
    Go to Control Panel -> Sound-> Playback tab, and set the Plantronics
    BT300 device as the Default Communications Device. If you plan to listen
    to streaming audio set the Plantronics BT300 device as the Default Audio
    Device as well. In the Playback tab, this is indicated by the green check
    mark.
    Go to Control Panel -> Sound-> Recording tab, and set the Plantronics
    BT300 device as the Default Communications Device.
    Windows XP
    Go to Control Panel -> Sounds and Audio Devices, and in the Audio tab
    set the Plantronics BT300 as the default device for Sound Playback and
    Sound Recording.
    5 Place a call from your computer softphone. During an active call, the
    Bluetooth USB adapter will flash blue..
    To Re-pair your Bluetooth USB adapter
    In the event that your headset and Bluetooth USB adapter become
    unpaired do the following:
    1 Power headset on.
    2 Remove the USB adapter.
    3 Power on your headset then choose:
    Tap the Voice button and say “Pair mode,” or
    Press and hold the Call button
    until you hear “Pairing”.
    4 Insert Bluetooth USB adapter directly into your PC USB port. Once
    successfully paired, LEDs stop flashing red and blue and you hear “PC
    connected”.
    Pair Mobile Phone and Call
    Pair your mobile phone
    1 Power on your headset then choose:
    Tap the Voice button and say “Pair mode,” or
    Press and hold the Call button
    until you hear “Pairing”. While the
    headset LEDs are flashing red and blue, activate Bluetooth® on your
    phone and set it to search for new devices.
    2 While the headset LEDs are flashing red and blue, activate Bluetooth®
    on your phone and set it to search for new devices.
    3 Select “PLT_Legend”.
    PLT_Legend
    4 If prompted by your mobile phone for a passcode enter 0000. Once
    successfully paired, LEDs stop flashing red and blue and you hear
    “pairing successful”. Some phones may prompt you to allow access to
    contacts to enable caller name announcement.
    PLT_Legend
    5 Make a test call from your mobile phone.
    6 End the call by pressing the call button . The call does not end when
    you remove your headset.
    Pair another phone
    After pairing your headset to your phone you may want to pair another
    or new phone.
    1 Power on your headset then choose:
    Tap the Voice button and say “Pair mode,” or
    Press and hold the Call button
    until you hear “Pairing”
    2 While the headset LEDs are flashing red and blue, activate Bluetooth®
    on your phone and set it to search for new devices.
    3 Select “PLT_Legend.”
    4 Once successfully paired, LEDs stop flashing red and blue and you hear
    “pairing successful.”
    NOTE Some phones may prompt you to allow access to contacts to enable
    caller name announcement.
    QUICK START GUIDE
    Voyager Legend UC
    Bluetooth Headset
    BT300
    Bluetooth USB Adapter
    Designed in Santa Cruz, California
    Use and Reset Smart Sensors
    Use sensors
    Smart Sensors react when you put on or take off your headset.
    Putting on your headset will:
    Answer an incoming call
    Transfer an active call from your phone (Available only with
    your mobile phone)
    Resume streaming audio
    Taking off your headset will:
    Transfer an active call to your phone handset (Available only with
    your mobile phone)
    Pause streaming audio
    Lock the Call button to prevent accidental calls
    Try voice commands
    Tap the Voice button wait for command request, then say a
    command. For example, “What can I say?” tells you the full list of
    available commands.
    Reset sensors
    You may need to reset the sensors if they are not working as expected.
    Wearing the headset, tap the Call button to test sensors:
    Talk time voice alert means sensors are working
    A tone means sensors need to be reset
    To reset the sensors, charge your headset and place on a flat non-
    metallic surface for more than 10 seconds.
    3
    Please refer to the separate safety instructions for important product safety
    information prior to installation or use.
    The B235 Wireless Headset System consists of a BT300 USB Adapter and a Voyager
    Legend Bluetooth headset.
    87750-01 (11.12)
    voice
    21
    Answer a call, choose:
    • Put on the headset to answer
    call, or
    • Tap the Call button or
    • Say “answer” after call is
    announced. (Available only with
    your mobile phone)
    Reject a call, choose:
    • Press Call button for
    2 seconds, or
    • Say “ignore” after call is
    announced. (Available only with
    your mobile phone)
    End a call
    Tap the Call button to end
    current call.
    Voice dial (mobile phone fea-
    ture)
    Press the Call button for 2
    seconds, wait for phone prompt
    and then tell the phone to dial
    the name of a stored contact.
    Mute the microphone
    during a call
    Tap the Mute button . You will
    hear “mute on” confirmation.
    An alert repeats every 15 min-
    utes as a reminder. Tap
    the Mute button again to
    open the microphone and hear
    “mute off” confirmation.
    Play or pause streaming audio
    A 2-second press of the Play/
    pause button
    will either
    pause or resume playback of
    streaming audio.
    Call back last call
    Double-tap the Call button .
    (Available only with your mobile
    phone)
    Adjust the volume
    Toggle the Volume button up
    (+) or down (–) during a call or
    while streaming audio.
    4
    NEED MORE HELP?
    Technical support
    plantronics.com/support
    Online user guide
    http://docs.plantronics.com/VoyagerLegendUC
    Plantronics, Inc.
    345 Encinal Street
    Santa Cruz, CA 95060
    United States
    © 2012 Plantronics, Inc. All rights reserved. Plantronics, the logo design, Plantronics Voyager Legend,
    QuickPair, are trademarks or registered trademarks of Plantronics, Inc. The Bluetooth® word mark and logos
    are owned by the Bluetooth SIG, Inc. and any use of such marks by Plantronics, Inc. is under license. All other
    trademarks are the property of their respective owners.
    Patents Pending
    Australia
    Z302 N10687
    Singapore Complies with
    IDA Standards DA101760
    Philippines
    Voyager Legend
    ESD - 1206509C
    BT300
    ESD - 1004955C
    BC
    FCC Regulatory Information
    Declaration of Conformity
    We Plantronics, 345 Encinal Street, Santa Cruz, California, 95060 USA (800) 544-4660, declare under our sole responsibility
    that the product BT300 complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this
    device may not cause harmful interference, and (2) this device must accept any interference received, including interference
    that may cause undesired operation.
    Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15
    of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
    installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
    accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee
    that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or
    television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct
    the interference by one or more of the following measures:
    —Reorient or relocate the receiving antenna.
    —Increase the separation between the equipment and receiver.
    —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
    —Consult the dealer or an experienced radio/TV technician for help.
    NOTE: Modifications not expressly approved by Plantronics, Inc. could void the user’s authority to operate the equipment.
    Industry Canada Regulatory Information
    This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme à la
    norme NMB-003 du Canada.
    This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two
    conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference
    that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables
    aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas
    produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage
    est susceptible d'en compromettre le fonctionnement.
    Exposure to RF Radiation
    The internal wireless radio operates within the guidelines found in radio frequency safety standards and recommendations,
    which reflect the consensus of the scientific community. Independent studies have shown that the internal wireless radio is
    safe for use by consumers. Visit plantronics.com for more information.
    This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
    This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. Cet équipement est
    conforme aux limites d'exposition de radiation IC énoncés pour un environnement non contrôlé.
Plantronics Voyager Legend BT300

Нужна помощь?

Количество вопросов: 0

У вас есть вопрос о Plantronics Voyager Legend BT300 или вам нужна помощь? Задайте его здесь. Полно и четко опишите проблему и сформулируйте свой вопрос. Чем больше вы сообщите о проблеме или вопросе, тем легче будет производителю Plantronics Voyager Legend BT300 вам ответить.

Посмотреть руководство для Plantronics Voyager Legend BT300 бесплатно. Руководство относится к категории Гарнитуры, 1 человек(а) дали ему среднюю оценку 6.9. Руководство доступно на следующих языках: английский. У вас есть вопрос о Plantronics Voyager Legend BT300 или вам нужна помощь? Задайте свой вопрос здесь

Технические характеристики Plantronics Voyager Legend BT300

Главная
Бренд Plantronics
Модель Voyager Legend BT300
Изделие Гарнитура
EAN 5033588039341
Язык английский
Тип файла PDF

Часто задаваемые вопросы

Ниже приведены самые часто задаваемые вопросы о Plantronics Voyager Legend BT300.

Не нашли свой вопрос? Задайте свой вопрос здесь

ManualsPDF.ru

Ищете руководство? ManualsPDF.ru гарантирует, что вы найдете необходимое за считанные секунды. В нашей базе данных содержится более 1 миллиона PDF-руководств от более 10 000 торговых марок. Ежедневно мы добавляем новейшие версии руководств, чтобы вы всегда могли найти необходимое именно вам. Все предельно просто: просто укажите название торговой марки и тип продукции в строке поиска, и вы сможете бесплатно и мгновенно просмотреть необходимое руководство.

ManualsPDF.ru

© Copyright 2020 ManualsPDF.ru. Все права сохранены.